No hay productos en el carrito
Desliza encima el ratón para ampliar la imagen
Bomba peristáltica con manguera SoloTech 30
Bomba peristáltica
Bombas peristálticas con manguera para medición y transferencia industrial
Manguera de 30 mm de tamaño. Caudal máximo de 60,57 lpm (16 gpm) a 91 rpm.
Bomba peristáltica
El diseño de bomba con manguera SoloTech 30 de Graco utiliza un único rodillo que comprime una manguera industrial a través de una rotación completa de 360 grados. Este diseño innovador significa una vida útil más larga de la manguera al bombear materiales cáusticos, abrasivos o sensibles para medición o transferencia.
- Más flujo por revolución que los diseños convencionales
- Bajos costos de mantenimiento: sin válvulas, sellos ni prensaestopas
- Las bombas son reversibles y pueden usarse para vaciar líneas o liberar obstrucciones
- Vida útil de la manguera prolongada: solo una compresión de manguera por revolución
| SoloTech Peristaltic Pumps | |
| Maximum Fluid Working Pressure |
0.9 MPa, 9 bar
|
| Motor Horsepower/Gear Ratio |
See the identification tag on your gear motor.
|
| Maximum Pump Speed |
90 RPM
|
| Environmental Temperature Range (Do not allow material to freeze in the pump.) |
–10°C to 40°C
|
| Maximum Flow | |
| ST10 |
2.5 lpm
|
| ST23 |
17.0 lpm
|
| ST26 |
37.1 lpm
|
| ST30 |
59.8 lpm
|
| Fluid Capacity per Revolution | |
| ST10 |
0.03 l
|
| ST23 |
0.20 l
|
| ST26 |
0.42 l
|
| ST30 |
0.68 l
|
| Flange Dimensions | |
| ST10 | |
| Outer Diameter |
90 mm
|
| Bolt Circle |
58–65 mm
|
| Bolt Size |
1/2 in.
|
| ST23 and ST26 | |
| Outer Diameter |
108 mm
|
| Bolt Circle |
75–80 mm
|
| Bolt Size |
1/2 in.
|
| ST30 | |
| Outer Diameter |
125 mm
|
| Bolt Circle |
85–90 mm
|
| Bolt Size |
1/2 in.
|
| Hose Inner Diameter | |
| ST10 |
10 mm
|
| ST23 |
23 mm
|
| ST26 |
26 mm
|
| ST30 |
30 mm
|
| Weight | |
| ST10 |
25–29 kg
|
| ST23 |
45–54 kg
|
| ST26 |
86–98 kg
|
| ST30 |
107–129 kg
|
| Noise | |
| Sound Pressure |
Less than 70 dB(A)
|
| Wetted Parts | |
| Hose options |
Natural Rubber, CSM, EPDM, NBR
|
| Barbed fitting options |
Stainless steel, PVDF, Hastelloy
|
| Technical Specifications for the Graco Motor Control (All installations and wiring must comply with NEC and local electrical codes.) | |
| DC Power Supply |
Class 2 Power Supply only
|
| Approvals |
UL508C
|
| Conformity |
CE-Low Voltage (2006/95/EC), EMC (2004/108/EC), and RoHS (2011/65/EU) Directives
|
| Ambient Temperature |
–40°C – 40°C
|
| Environment Rating |
Type 4X, IP 66
|
| Overtemperature Sensing Specifications (The drive is provided with a means to accept and act upon a signal from a thermal sensor in the motor. Motor overtemperature sensing is required to provide the motor overload protection.) |
0–3.3 VDC, 1mA maximum
|
| Weight |
4.8 kg
|
| Input Specifications | |
| Input Line Voltage |
120/240 VAC, line-to-line
|
| Input Line Phasing |
Single Phase
|
| Input Line Frequency |
50/60 Hz
|
| Input Current per Phase |
16A
|
| Maximum Branch Circuit Protection Rating |
20A, Inverse Time Circuit Breaker
|
| Short Circuit Current Rating |
5 kA
|
| Output Specifications | |
| Output Line Voltage |
0–264 VAC
|
| Output Line Phasing |
Three Phase
|
| Output Current (Current limit, set via the software, is provided as a secondary protection from motor overload.) |
0–12A
|
| Output Power |
1.92 KW / 2.6 hp
|
| Output Overload |
200% for 0.2 seconds
|
